| FAG NJ316-E-M1-C3 Cylindrical Roller Bearings | J1:47.625 mm; Ca:37.008 mm; Cap bolt:2 x 1/2-13 UNC; R1:46.038 mm; Housing:FSAFS 515; P60°:75.6 kN; Mass pillow block:15.4 kg; H:161.925 mm; Stabilizing ring:SR-15-0; H2:30.163 mm; |
| FAG S6209-C3 Single Row Ball Bearings | s max.:4.5 mm; da min.:298 mm; Fatigue load limit Pu:320 kN; ra max.:4 mm; F:333 mm; Calculation factor kr:0.3; Axial load factor Y:0.4; Da max.:482 mm; db min.:331 mm; Mass bearing:115 kg; |
| FAG 7308-B-TVP-UL Angular Contact Ball Bearings | D:370 mm; rs (min):4 mm; Oil:254.760 kN; Static (Cor):16.7 mm; with tapered bore:1 200 min-1; Pu:1880 kN; d:220 mm; Grease:2890 kN; Dynamic (Cr):9 mm; with cylindrical bore:900 min-1; |
| FAG HC7012-E-T-P4S-UL Precision Ball Bearings | Housing:SAF 544; N1:41.275 mm; Pa:71.2 kN; Adapter sleeve assembly:SNW 44x8; Eye bolt:2 x 1/2-13 UNC; H2:95.25 mm; L:831.85 mm; S:4.763 mm; Max. speed for Taconite seal:385 r/min; PG:1/4 NPT; |
| FAG 2111HDH Precision Ball Bearings | Da max.:213.5 mm; dk:207.162 mm; b:15 mm; d:152.4 mm; C:104.775 mm; b1:11 mm; Basic dynamic load rating C:1730 kN; Design (sliding contact surface combination):Steel/steel, heavy-d; da max.:168 mm; ra max.:1 mm; |
| FAG NU314-E-TVP2-C3 Cylindrical Roller Bearings | Basic static load rating C0:4250 kN; B5:50 mm; B1:195 mm; b:16.7 mm; db min.:296 mm; D1 ≈:417 mm; B:146 mm; K:9 mm; ra max.:4 mm; d3:330 mm; |
| FAG NJ313-E-M1-C4 Cylindrical Roller Bearings | Bolt Pattern D:2 1/4 in; Travel:3; Frame Accepts These Shaft Sizes (Bearing Bore):20 mm, 25 mm; Length H:0.500 in; Frame Size A:4 1/8 in; Shaft C/L Distance F:1 2/5 in; Bolt Pattern C:0.55 in; Height G:2.938 in; Frame Size B:8 in; Bolt Pattern E:6 1/2 in; |
| FAG 16009-A-C3 Single Row Ball Bearings | Fatigue load limit Pu:13.7 kN; Reference speed:5300 r/min; Ew:83 mm; Fw:75 mm; U:23 mm; Mass needle roller and cage assembly:0.12 kg; Limiting speed:6300 r/min; Basic dynamic load rating C:47.3 kN; Basic static load rating C0:110 kN; |
| FAG 6205-2RSD-575946 Single Row Ball Bearings | Fillet Radius ra:1.50 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:44200 N; d:40.000 mm; Grease Speed Rating n1:7300 rpm; Basic Static Radial Load Rating Co:30500 N; Oil Speed Rating n2:9500 rpm; D:90.0000 mm; B:23.00 mm; |
| 80 mm x 170 mm x 58 mm FAG 2316-M Self Aligning Ball Bearings | Grease Speed Rating Open/Shielded n1:2100 rpm; d:110.000 mm; Accessories:One Shield; Basic Static Radial Load Rating Co:260000 N; Basic Dynamic Radial Load Rating C:270000 N; Sealed Speed Rating n3:1500 rpm; Oil Speed Rating Open/Shielded n2:2600 rpm; B:70.00 mm; Fillet Radius ra:3.00 mm; D:320.0000 mm; Size (mm):80 mm x 170 mm x 58 mm ; |
| FAG 6202-010-2RSR Single Row Ball Bearings | Grease Speed Rating n1:1000 rpm; B:160.00 mm; D:480.0000 mm; Oil Speed Rating n2:1400 rpm; Basic Dynamic Radial Load Rating C:904000 N; Basic Static Radial Load Rating Co:1830000 N; d:260.000 mm; Fillet Radius rb:1.50 mm; Fillet Radius ra:4.00 mm; |
| FAG 109HCDUM G-75 Precision Ball Bearings | Nut for removal:KM 38; Mass withdrawal sleeve:5.5 kg; d:180 mm; Hydraulic nut:HMV 38 E; B2:160 mm; G1:26 mm; G:M 190x3; B1:154 mm; d1:170 mm; |